PIXEL HF

PIXEL HF is a modern x-ray generator available in a wide range of configurations delivering radiological power from 30 kW to 80 kW; 1 or 2 tubes; for radiography only or radiofluoroscopy purposes; 380V supply. PIXEL HF is designed for a variety of applications, from basic radiography up to digital cardio/angiographic x-ray diagnostic applications and models offering economy benefits combined with appropriate performances are available.

Main features:

• HT Generator and electronics cabinet of reduced weight and compact over-all dimensions thanks to the innovative 100 kHz technology.

• The ergonomically designed layout incorporates a full function liquid crystal display of all values, programmes and safety information.

• Precise and accurate setting of the radiographic factors kV-mA–sec. or kV–mAs.

• Anatomical Programming Mode offering more than 500 examination selection.

• Technologically advanced Automatic Exposure Control for connections of ultra-thin ionization chambers.

• DIGI-AEC, automatic control device for selection of radiography kV during fluoroscopy examinations. Especially designed to work with digital video fluorography systems.

• Automatic setting of the x-ray dose both during continuous and pulsed fluoroscopy (R/F models).

• Two x-ray dose settings available in Fluoroscopy mode.

• High Speed Starter for 9000 rpm supplied as standard for the 80 kW unit. Available as optional for the other models.

• Interface for connection of any x-ray tube and accessory.

• Easy installation and servicing thanks to the integrated software.

• X-Ray tube safety protection and real time heat unit calculator.

• Constant monitoring and signalling in case of x-ray tube overheating; door open, failed anode rotation and wrong exposure.

• During the 2000 a further development in the system’s hardware and software has produced features improvement such as:

• New larger LCD high contrast display for a better reading of the parameters.

• Very short switching time from Fluoroscopy into Radiography modality.

• Multilanguage software installed.

• Wider list of the preset x-ray tubes.

• Data storage for each single x-ray tube in the two tube versions.

PIXEL IT

The PIXEL IT X-ray generators are the current standard for a wide range of radiographic systems.

The modular design of the IT family incorporates high versatility and excellent adaptation to all requirements of radiographic applications. The PIXEL IT is prepared for the adaptation of one X-ray tube assembly. The generators are available with a nominal power of 30 kW or 55 kW.

The user-friendly control console and the generator communicate via serial interfaces. The integrated processor system ensures high accuracy and

reproducibility of the radiographic data by performing all control and regulating functions.

Every exposure is generated with the correct film density via the  Automatic Exposure Control integrated into the generator (optional with PIXEL IT 30).

A microprocessor fully compensates for the response characteristic of the particular film- screen combination.

To optimise the lifetime of the tube, the required cooling interval is shown after each exposure.

Main features:

• 100 kHz technology

• Highly accurate radiographic parameters .Precise reproducibility

• Fast regulation of high voltage and tube current

• Short exposure times

• Minimal space requirements .16-bit microprocessor

• Digital display of all selected data .User-friendly operation via membrane keys

• Integrated service functions for ease of service