CLINODIGIT

90/90 remote controlled tilting table especially designed to work with Digital Fluorography systems. CLINODIGIT is totally made of Aluminium and thanks to the extremely compact overall dimensions it can be installed even in limited room space. Perfectly smooth carbon fiber height adjiustable table-top to increase patient comfort and accessibility. Capable of accepting I.I. sizes up to 16” (40 cm); complete with tomography device; FFD setting from 110 up to 150 cm; compression device; cordless remote control and remote control desk. A traditional x-ray cassette tray for film exposures can be provided.

CLINODIGIT is an extremely innovative x-ray equipment: it is a remote controlled tilting table especially designed to work with digital acquisition systems and it is not a traditional unit modified for that use. Therefore, all requirements for the best linking between CLINODIGIT and digital imaging systems have been deeply studied:

• any size image intensifier setting: 9", 12", 14" and 16" without mechanical movement limitation.

• extremely reduced distance, approximately 2 cm., between table-top and image intensifier input screen to get the maximum study field and to reduce the geometric enlargement which can cause poor resolution

• carbon fiber table-top which improves the image quality thanks to the minimum x-rays absorption and to the structure uniformity

• simple to use and quick movements in order to not penalize exposure time reduction of the new digital systems.

CLINODIGIT features:

• Table-top/floor height setting. Minimum floor distance: 68 cm. The lowest one the market can offer

•  perfectly smooth table-top surface to increase patient comfort and accessibility

• 90/90 with possibility of both right and left side patient positioning

• focus-film distance setting: from 110 to 150 cm.

• compression device at three adjustable values

• cordless remote control

• tomographic device, 4 angles and 4 speeds for each angle, adjustable layer up to 250 mm. (optional)

• x-ray cassette tray for traditional film exposures: the distance between table-top and I.I. input screen is increased to 3,5 cm. (optional)

• device for manual x-ray tube rotation to allow the exposures using stretchers or vertical bucky stands (optional)

• total light alloy frame for installation in any room without floor reinforcements

• thanks to the reduced overall dimensions and to the possibility of positioning the back side close by the wall, CLINODIGIT can be installed even in limited room space

• extremely compact control desk with LCD display

• microprocessor controlled unit with self-diagnosis software.

CLINODIGIT SFD

ITALRAY has developped an evolution of the remote controlled table Clinodigit, already present on the market since a few years, producing two new models which, maintaining the advanced high technology of the previous one, increase the possibility of choice of our customers. The two new models named CLINODIGIT SFD 99 and CLINODIGIT SFD 93 have been designed to be used, without distinction, with conventional film/cassette radiography, with digital fluoroscopy and with the new flat detector for digital radiography in whichever combination between each other. Both the models have leading performance and mainly:

• Stratigraphic device with 5 angles (8,15,20,30 e 40)

• Automatic spot film device suitable to receive x-ray cassettes from 18x24 to 35x43 cm.

• Wide choise of film divisions in bands (up to 5)

• Extremely reduced distance between table top and film max. 5,6cm.

• Variable FFD with continuity from 105 to 150 cm

• Reduced time between fluoroscopy and radiography less than a second

• Wide exploring field 168 cm. transversal and 27 cm. longitudinal

• Remote controlled compression device

• Possibility to make oblique incidences up to +/- 40 with correction of the parallax.

• Electronic collimation of the x-ray field inside the controlled area

• Possibility to mount image intensifier up to, 16"

The following are particular features of the CLINODIGIT SFD 99:

• table tilting from +90 to -90

• table top height setting

The following are particular features of theCLINODIGIT SFD 93:

• table tilting from +90 to -30

• compact design complete of electronic.

The CLINODIGIT SFD 93 radiologicaltable basically consists of:

• Control console

• patient movement column

• X-ray tube raising column

• X-ray tube rotation unit

• X-ray tube (*)

• X-ray collimator unit

• patient compression unit

• patient table

• spot film device

(*) Not supplied

The CLINODIGIT SFD 99 radiological table basically consists of:

• Electronic component cabinet (RACK)

• Control console

• patient movement column

• X-ray tube raising column

• X-ray tube rotation unit

• X-ray tube (*)

• X-ray collimator unit

• patient compression unit

• patient table

• spot film device

ACCESSORIES (99/93)

• Removable platform on the patient table

• Handgrip

• Handrail

• Shoulder-rest

• Compression band (supplied on request)