BT

Orizontal bucky table with four ways floating table-top at fixed height. Foot-switch brake control. Other features as per BTE.

BTE

Horizontal bucky table with four way floating table-top and motorised height adjustment. Positioning and access for traumatised, aged and disabled patients is much easier.The smooth table-top surface ensures ease of movement for stretched patients. BTE is provided with under-table potter bucky with a R 12:1 103 L/inch grid. The bucky will accept any brand of ionisation chambers.Brakes and vertical movements are controlled by a handle attached to the table- top. There are slides for accessories insertion.

BT TOMO - BTE TOMO

TOMO BT and TOMO BTE are linear horizontal tomograph units. Principal technical features are millimetric layer height setting from 0 to 250; three tomo angles 8°, 30°, 45° and three timings for each angle with ranges from 0,2 to 3 seconds; automatic layer height increment device after each exposure.As an option, a software package is available to give eight angles 8°, 15°, 20°, 30°, 35°, 40° and 45° with five timings for each angle.

STATIX

Column tube stand sliding on floor rails without wall or ceiling fixings. The STATIX, thanks to its movement possibilities, allows the optimal positioning of the x-ray tube during radiographic examinations. The x-ray tube can be rotated on its axis to allow particular oblique examinations and to operate with chest stands. It has a minimum floor to focus distance of 55 cm. 270 degrees stand rotation for lateral examinations or special projections with stretchers. STATIX is supplied with a multiple leaf collimator with halogen lamp and bucky light for cassette centring.

CEILSTAND

The Ceilstand is an new ceiling suspended crane that benefits from many years of design, engineering and manufacturing expertise in ceiling suspension systems. It incorporates all the ideas and innovations that only this wealth of experience can make possible. 
This remarkable new unit bears witness to this expertise which can be seen in the large range of available model options including those with extra vertical and horizontal travel, different tube support arms, supporting a range of tube weights and the capability to link one or more units. 
The quality of engineering can be felt in the super-smooth and light movements in all planes and at any angle, all requiring the absolute minimum of operator effort thanks to the ultra-light weight design and structural rigidity of system components.
These combined characteristics make the Ceilstand ideal for every ceiling suspension requirement wheter supporting an X-ray tube with a fixed or tilting table, a stretcher or a vertical bucky or supporting an image intensifier in a conventional or Angiographic application. The flexibility of the unit is such, that even in its Tomographic version, the extra capability does not in any way compromise its already outstanding performance. 

BS 45

Column bucky stand with bucky 43x43 cm, fine ratio vibrating grid especially designed for examinations in vertical position e.g. chest. Ionisation chambers of any kind can be linked to the potter bucky. BS 45 can be installed both next to the wall, by adequate fixings, and with a pedestal without reducing its utilisation in case of more space needed for disabled patients. Full vertical bucky movement for any anatomic area examination. BS 45 can be supplied with external x-ray cassette for examinations without grid.

STRETCHER

Mobile, radiotransparent stretcher with locking device
 

  

COSMO X

COSMO-X Polyvalent radiographic stand. Main technical features:

• Changeable FFD : from cm. 99 up to cm. 190

• Minimum distance between patient and film: mm. 49

• Tuber-potter stand rotation : +/- 135°

• Horizontal x-ray beam height from floor: from cm. 50/160 

• X-ray tube rotation: +/- 120°

• Potter bucky with high speed vibrating grid, suitable for automatic exposure device installation

• Stretcher dimension: cm. 200x65x71h

COSMO X BRS

COSMO-X BRS Multipurpose radiographic stand. Main technical features:

• Focus-film distance : cm. 140 fixed

• Vertical travel of the "U" arm: more than cm. 130

• Rotation of the "U2 arm: 120°

• Min. height of x-ray tube from floor: cm. 45

• Collimator with luminous centering with high brightness alogen lamp

• X-ray cassettes tray auto-centering for all sizes up to cm. 35x43

• Fixed grid system (mobile grid optional)

• Electromagnetic brakes for vertical travel and rotation