A. Features:
Roytech3 has been designed and manufactured
according to the
international standards such as ISO, CGA, UL, BS, ASTM, IEC 601
and so on.
This machine has a 10.4" TFT color LCD display for
ventilator and pressure monitor and display airway pressure
waveform and PEEP as well as ventilator parameters like rate,
I:E ratio, set TV and measured MV and trend. And there are
direct stand-by / operation key of the ventilation for
convenient using and direct parameter keys and most of functions
are easily controlled by the encoder key.
Strengthen safety device : N2O/AIR selector and automatic change
over function for supplying gas failure, anti-hypoxia system,
N2O cut-off valve,
and alarm whistle for O2 failure, over pressure relief valve on
the pressure gas outlet, relief valve with regulation for over
pressure of input supplying gas and comply with DISS, TISS, CCSS,
PISS, NIST.
B. Configuration:
 3
gassed machine(O2/N2O/Air)
Pneumatic control
system
Single or dual
flowmeter with EL back light
Two selectatec
vaporizers
'Compact3' CO2 absorber
system
Mobile type
'Narcovent' Anesthetic
ventilator
- Display : 10.4" color TFT LCD
- Microprocessor : i486DX4-100
- Tidal volumes control: from 1500 ml up to 20 ml with
compensation for circuit compliance and fresh
gas flow.
- PEEP display : 5-20 cmH2O
- Driving gas :
a. Compressed air or oxygen.
b. With loss of primary gas,
secondary gas is
automatically
switched on.
- Maximum inspiratory flow : 50 lpm
- Inspiratory flow pattern : Constant flow in volume controlled
ventilation
- Waveforms : Patient pressure
- Pause : 0-60%
- Trend : Graphic & Numeric
- Tidal volume : 20-1500ml
- Minute volume display : 0-150 lpm (Resolution : 0.1 lpm)
- Rate : 5 -80 bpm
- I:E ratio : 1:3.0
- Sigh : OFF/ON : 1.5 x TV every 150 breaths, 1.5 x cycle time.
- Pressure release at high pressure limit, Pmax release :
80cmH2O
- Battery operation
|
